The PHASE SELECT button selects the phase of the feedback and its diffusion, characterised as softer or harder reflections. The FEEDBACK fader sets the proportion of reflected signal that is re-circulated. The FEED ALONG fader sets the amount reflection density and echo complexity due to re-injection of distributed sound within the simulated space. Lower settings will cause more distant reflections to be quieter, whereas at maximum, all reflections will have equal level, irrespective of path lengths. The TAPER fader controls the loudness of reflections in relation to path lengths. Separation is increased from normal, going ultra-wide beyond 100%. The WIDTH fader sets the stereo separation of room reflections with normal placement at 0.0%. The room proportions remain as the size is adjusted. The SIZE fader sets the front to back distance for the room. The POSITION fader selects the listening postion on a central front to back axis. When set at 0.0, the low frequencies are completely unaffected.įour SHAPE buttons allow basic 'virtual room spaces' to be selected. The LF ROLL-OFF fader allows reduction in low frequency content for the signal passed to the reverb processor, but does not affect the dry signal.
#SONNOX OXFORD REVERB FULL#
The STEREO SEPARATION fader allows the left and right signals to be mixed in order to reduce the stereo width, with variation from full stereo to mono. The INPUT GAIN fader sets the level of signal fed into the reverb process.